What are the types of Agriculture Pipes & Fittings?

Agriculture Pipes are available in 02 types. 1. Selfit (Solvent Cement Joint) 2. Ringfit (Rubber Ring Joint).

What is the IS Standard for Agriculture range?

Agriculture Pipes are conforming to IS 4985. Agriculture moulded fittings are as per IS 7834.

What is the range of Finolex Agriculture pipes?

Finolex manufactures Agriculture water pipes from 20 mm to 400 mm dia pipes in various pressure classes viz- (2.5 ,4,6,8,10,12.5) kg/cm2

Which is the primary uses of Finolex Agriculture pipes?

Finolex Agriculture PVC pipes are primarily used in agriculture & potable water supply.

Which are the key applications of Agriculture Pipes & Fittings?

Agriculture PVC pipes & fittings are used for pressure and gravity flow applications in agriculture, irrigation, potable water supply, and swimming pools.

Agriculture pipelines are normally laid down at what depth below the surface?

Agriculture water pipes are normally laid down at a depth of 1 meter below the ground surface, excluding the OD of the pipeline.

For the agriculture pipeline scheme, how many pipes of 6 kg/cm2 are recommended from the source of water or pump?

It all depends on the design from your consulting engineer based on the head of the pipeline (static + frictional) and other head losses, water surge/hammer. “L“ section from your engineer will clearly indicate the exact number of 6 kg/cm2 pipes at the beginning of the pipeline.

What could be the normal reasons for Agri pipes bursting in an Agri pipeline?

Faulty pipeline design, deviations from the design, wrong pipe size in mm (undersize), High HP motor/pump, insufficient and wrongly placed air valves, and poor-quality PVC pipes and many more, can lead to bursting of pipes in agriculture pipelines.

Heavy duty solvent cement for agriculture pipes is used for which sizes?

Heavy duty solvent cement should be used for Agriculture pipes above 110 mm (4“) pipes.

For which Agriculture pipes rubber lubricant is used?

Rubber lubricant is used for the installation of Ringfit Agri pipes & fittings.

How Agri pipes should be stored?

Agri pipes should be stored on a flat surface, in a crisscross manner, with the socket facing outwards and the height should not exceed 1 meter. Pipes should not be exposed to sunlight.

When can the Selfit Agri pipeline be charged?

After joining with solvent cement, a curing time of 24 hours is required and thereafter, the pipeline can be charged/commissioned.

Ball Valve

A ball valve is a type of valve that uses a spherical ball with a hole through the center to control the flow of liquids or gases in a piping system. When the valve handle is turned, the ball rotates, aligning the hole with the pipe to allow flow, or rotating it 90 degrees to block the flow completely. Ball valves are known for their reliability, durability, and ability to provide quick and precise shut-off. They are widely used in various applications, including plumbing, heating, gas, and water systems.

One of the main advantages of ball valves is their tight seal when closed, making them highly effective in preventing leaks. They are also low-maintenance and easy to operate, often requiring only a quarter turn of the handle to open or close the valve. Ball valves come in different materials, such as brass, stainless steel, and PVC, making them suitable for a wide range of environments, from residential plumbing to industrial systems. With their simple design and efficient performance, ball valves are a popular choice for controlling fluid flow in both residential and commercial settings.

Ball Valve

Ball Valve

Enquiry Form